Specifications
	
	Specifications
		| General Properties | |
|---|---|
| Beamline Energy Resolution | 40 [meV] @ 400 [eV] 180 [meV] @ 900 [eV] | 
| Beamline Resolving Power | 1 * 104 [E/deltaE] @ 400 [eV] 5 * 103 [E/deltaE] @ 900 [eV] | 
| Beamline Energy Range | 90 - 1800 [eV] | 
| Max Flux On Sample | 1 * 1013 [ph/s] @ 200 [eV] 1 * 1012 [ph/s] @ 400 [eV] | 
| Spot Size On Sample Hor | 100 - 150 [um] | 
| Spot Size On Sample Vert | 5 - 100 [um] | 
| Angle Of Incidence Light On Sample Value | 20 - 90 [degrees] | 
| Control And Data Analysis | |
| Control Software Type | LabView based software. | 
| Data Output Type | Spectra File and Parameter File with Analyzer Settings, Temperature, Pressure, Photon Energy, Reference Current, Sample Polar and Azimuthal Angles, Custom Readings on request. | 
| Data Output Format | Igor format, ASCII format if requested by the user. | 
| Softwares For Data Analysis | Commercial Igor software. | 
	
	Photon Sources
		2 section Kyma Linear Planar Undulator
| Type | Undulator | 
|---|---|
| Available Polarization | Linear horizontal | 
| Source Spectral Brightness | 1 * 1019 [ph/s/mrad^2/mm^2] @ 200 [eV] | 
| Energy Range | 95 - 1800 [eV] | 
| Number Of Periods | 98 | 
| Period | 46 [mm] | 
	
	Monochromators
		SX700
| Energy Range | 85 - 1800 [eV] | 
|---|---|
| Type | Plane Grating Mirror (PGM) | 
| Resolving Power | 5 * 103 [E/deltaE] @ 900 [eV] 1 * 104 [E/deltaE] @ 400 [eV] | 
| Number Of Gratings | 2 | 
| Grating Type | laminar grating - 1220 lines/mm blaze grating - 1220 lines/mm | 
| Pre-focusing Mirror Type | Cylindrical | 
| Refocusing Mirror Type | Ellipsoidal | 
	
	Endstations or Setup
		SuperESCA Main
| Spectrometer | Hemispherical Electron Energy Analyzer SPECS Phoibos 150: - mean radius 150 mm - energy resolution < 5 meV - acceptance angle up to ±13° - home made 1D delay line detector | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Base Pressure | 8 * 10-11 [mbar] | ||||||||
| Detectors Available | 1D Delay Line Detector | ||||||||
| Endstation Operative | Yes | ||||||||
| Sample | |||||||||
| Sample Type | Crystal, Amorphous | ||||||||
| Other Sample Type | Nanostructured samples | ||||||||
| Mounting Type | Custom mounting plate or modified CTPO sample holder | ||||||||
| Required Sample Size | X = 9 [mm], Y = 9 [mm], Z = 1 [mm] | ||||||||
| Techniques usage | |||||||||
| Absorption / NEXAFS | Absorption spectra are measured in Auger yield. By changing sample orientation, the angle between the electric field E of the polarized light and and the normal to the sample surface can be varied in the range from 20 to 90 degrees. | ||||||||
| Photoelectron emission / Angular Resolved PES | The technique is available if the modified CTPO manipulator is used, which allows software controlled angular movements of the samples. | ||||||||
| Photoelectron emission / Photoelectron diffraction | Core level intensity is measured as a function of polar and azimuthal emission angles. The technique is available if the modified CTPO manipulator is used, which allows software controlled angular movements of the samples. | ||||||||
| Photoelectron emission / Time-resolved studies | Fast XPS allows monitoring the evolution of core level spectra (typical acquisition time between 4 and 10 seconds per spectrum), e.g. while exposing the sample to gases or during an annealing. | ||||||||
| Manipulator or Sample stage | |||||||||
| Manipulator | 
 | ||||||||
| Sample Holders | |||||||||
| Custom sample holder | 
 | ||||||||
| Modified CTPO holder | 
 | ||||||||
	
	Detectors
		1D Delay Line Detector
| Type | Microchannel Plate based delay line detector. | 
|---|---|
| Description | In house developed 1 dimensional delay line detector. The detector is mounted on the SPECS Phoibos 150 electron spectrometer. | 
| Pixel Size | X = 100 [um] | 
| Array Size | X = 800 [pixel] | 
| Passive or Active (Electronics) | Active | 
| Output Readout Software | LabView based home developed software | 
| Detection | |
| Detected Particle | Electron | 
Last Updated on Friday, 08 March 2019 11:20
 
		
        